ESE HD-266/SD Instrukcja obsługi i konserwacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Urządzenia przemysłowe ESE HD-266/SD. ESE HD-266/SD 13 stron. Hd/sd sdi time code reader/inserter
Drukuj stronęPlease review the following safety precautions. If this is the first time using this unit, then read this manual before
installing or using the unit. If the unit is not functioning properly, please contact the ESE factory or system installer.
Failure to follow these safety instructions could result in injury to you or damage to the unit.
Be careful with electricity:
•
Power outlet: To prevent electric shock, be sure the electrical plug used on the unit's power cord matches the
electrical outlet used to supply power to the unit. Only connect the power cord to a power source that operates
between 90-264 VAC, 47 - 63 Hz. If option DC is ordered, only connect the power input to a power source that
operates between +12 to +35 VDC. If option UL is ordered, only connect the wall wart adapter to a power
source that operates between 90-264 VAC, 47 - 63 Hz.
•
Power cord: Be sure the power cord is routed so that it will not be stepped on or pinched by heavy items.
•
Power overloading: Avoid overloading electrical outlets or extension cords which otherwise could result in
electric shock or fire.
•
Lightning: For protection from lightning or when the unit is left unattended for a long period, disconnect it from
the power source.
•
Protect other equipment: Unplug the unit before connecting any other equipment. Connect all equipment to
the unit before plugging in any power cords to the power source.
TO REDUCE THE RISK OF ELECTRICAL SHOCK, UNPLUG THE UNIT BEFORE REMOVING THE COVER
Also follow these precautions:
•
Ventilation: Do not block any ventilation holes on the unit or place any heavy object on top of it. Blocking the
airflow could damage the unit. Arrange components so that air can flow freely around the unit. Ensure that
there is adequate ventilation to the unit wherever it is placed. Put the unit in a properly ventilated area, away
from direct sunlight or any source of heat.
•
Overheating: Avoid stacking the unit on top of a hot component.
•
Risk of Fire: Do not place the unit on top of any easily combustible material, such as paper, carpet or fabric.
•
Proper Connections: Be sure all cables and equipment are connected to the unit as described in this manual.
•
Object Entry: To avoid electric shock, never stick anything in the holes on the enclosure or remove the cover.
•
Water Exposure: To reduce the risk of fire or electric shock, do not expose the unit to rain or any other source
of moisture.
•
Keep the unit out of the reach of children or it may fall, causing personal injury or damage to the unit.
•
Always disconnect the power cord from the power outlet when you are not using the unit. This reduces
your risk of electric shocks or fire.
•
Always turn off the unit, disconnect it from the power outlet, and unplug all other cables from before
moving the unit. This reduces your risk of electric shocks or fire.
SAFETY INSTRUCTIONS
WARNING!
REFER SERVICING TO QUALIFIED PERSONNEL
Page i
Revision 1.2