ESE HD-266/SD Instrukcja obsługi i konserwacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Urządzenia przemysłowe ESE HD-266/SD. ESE HD-266/SD 13 stron. Hd/sd sdi time code reader/inserter
Drukuj stronę1.0 INTRODUCTION
The HD-266/SD is a High Definition (HD) and Standard Definition (SD) Serial Digital Interface (SDI) Time Code
Reader/Inserter. The unit reads ESE Time Code, ESE Timer Code, DVITC, RP-188 Time Code and SMPTE/EBU
LTC at play speed only.
Time code insertion is also an integral part of the HD-266/SD. Time and date, date, time or up to 30 characters of
text may be superimposed onto the video in two independent windows, which may be individually blanked. Ten
different font sizes are available. Grayscale and six solid color fonts (red, orange, yellow, green, blue and violet)
are included. Frames are not displayed when reading SMPTE/EBU LTC.
The HD-266/SD accepts 1080i/60, 1080i/59.94, 1080i/50, 1080p/30sF, 1080p/29.97sF, 1080p/25sF, 1080p/24sF,
1080p/23.98sF, 720p/60, 720p/59.94 and 720p/50 digital video signals and automatically equalizes up to 250m of
Belden 1694A cable at 1.485Gb/s. The HD-266/SD equalizes up to 480m of Belden 1694A cable at 270Mb/s.
Embedded audio and other ancillary data signals are passed through the unit. If time code is embedded into
RP188 or DVITC, the new time code replaces any existing data. Two HD/SD SDI outputs are provided. The
formats of the SDI outputs match the format of the SDI input.
All of the features of the HD-266/SD are set using the front panel pushbuttons or the PC Control Panel software.
The LCD menu selections and the Control Panel software are described in detail in sections 5 and 6, respectively.
The unit is housed in a black anodized desktop enclosure (8" W x 1.6" H x 6.7" D). The power requirements for
the unit are 90 – 264 VAC, 47 – 63 Hz, 15 W maximum. A 2-amp fuse is provided on the rear panel.
2.0 INSTALLATION & OPERATION
Installation of the HD-266/SD requires connecting equipment to the HD-266/SD and setting up the HD-266/SD via
the front panel LCD menus or the PC Control Panel software. Plug the unit in to 117 VAC or 220 VAC. The front
panel LCD indicates that the unit is booting up, displays the current firmware version and then displays the time
and date. The time starts from 00:00:00 and the date starts from 2012/01/01 (Y/M/D) if no time code is present.
Video connections to the HD-266/SD may be made at any time. Connect the HD or SD SDI source to the SDI
Input BNC. The HD-266/SD auto-detects whether video input signal is SD or HD. One device may be connected
to each SDI output BNC (two SDI outputs are provided).
Time code connections to the HD-266/SD may also be made at any time. Connect an ESE or SMPTE/EBU LTC
source to the ESE Input BNC if desired.
After connections to the unit are made, the user should go through the LCD menus to set up the unit according to
the inputs connected to the unit. The menus are described in detail in section 5. Alternatively, the user may use
the PC Control Panel software to set the unit up. The PC Control Panel software is described in detail in section
6.
Once the HD-266/SD is set up according to the user specifications, the unit is ready to use. If the settings are
changed via the LCD menu or Control Panel software, they are not made permanent for 30 seconds. Because of
this, the unit should not be turned off for 30 seconds after changes are made to the settings.
3.0 ENCLOSURE
The HD-266/SD is housed in a black anodized desktop enclosure that measures 1.6" high x 8" wide x 6.7" deep
(plus connectors). The ruggedized enclosure is constructed of aluminum.
4.0 STANDARD FEATURES
4.1 Front Panel
4.1.1
16 x 2 Character LCD
The front-panel 16 x 2 character LCD shows the status, time and date of the unit and is used
to display the menus.
4.1.2
USB Port
The USB port is used to interface the HD-266/SD with a PC. PC Control Panel software is
provided with the HD-266/SD. The Control Panel software allows the user to change settings
without having to use the front panel pushbuttons and LCD. The USB port is also used to
update the firmware for the HD-266/SD.
4.1.3
Front Panel Pushbuttons
Page 1
Revision 1.2