Camfil PM1 Tracker Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Camfil PM1 Tracker. Camfil PM1 Tracker 8 stron. Indoor air quality (iaq) measurement device
Drukuj stronęThe PM1 Tracker is an Indoor Air Quality (IAQ) measurement device, that can be handheld or connected
to a cloud.
The nephelometric sensor gives indicative values of particules <1µm (0,5 to 1µm), recognized as the
most harmful particles to human health. It also measures Wellness parameters: temperature and relative
humidity.
Different measurement modes are available:
• PM 1ndex: IAQ index developed by Camfil and based on WHO guidelines and 50 years of indoor air
measurements.
• Realtime: Number of particles and PM1 value (mass) – Temperature – Relative Humidity
• Monitoring: this function is not activated yet
1. INTRODUCTION
The different PM1 Tracker modes are accessible via the Selection Button on the side of the unit: press
once to change between modes or hold the button 2s. to validate the mode of choice.
The Selection Button is used to select different modes, validate and select options.
In certain modes, an automatic stop of the unit is programmed, for battery savings. In order to preserve
battery life, in certain modes the unit will automatically switch off when left idle.
Operations Indicator LED
Battery charge through USB
Information Panel - Multicolour Screen
Nb of particles (0,5 – 1µm)
PM1 in µg/m3
T°C
Relative Humidity
Selection Button
Camfil - Clean air solutions
3