Divus KNX SERVER Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Divus KNX SERVER. Divus KNX SERVER 20 stron. Knx systems visualization solution

http://192.168.0.110

This link will directly open the login page of

OPTIMA, where you can login as administrator

with the following login credentials.

Username: admin

Password: admin

After successful login, the configuration menu

can be reached by clicking on the ADMIN-button

in the toolbar of the displayed navigation menu

2.6 RESET OF THE IP ADDRESS

If needed, the IP address of KNX SERVER can

be reset to factory settings through the RE-

SET-button on the bottom side of the device:

˚ Localize the RESET-button on the device and

get a screw driver or a similar tool with a small

diameter to reach the RESET-button through

the small cutout in the housing of the device.

˚ Press the RESET-button until the SERVICE-

LED starts blinking (about 10 seconds); after-

wards release the RESET-button.

˚ Press the RESET-button again within the next

5 seconds for max. 2 seconds and then re-

(

- show/hide navigation menu). Detailed in-

formation about the visualisation and configu-

ration of OPTIMA can be found in the OPTIMA

USER-MANUAL and the OPTIMA ADMINISTRA-

TOR-MANUAL.

The maximum comfort for using/

programming DIVUS OPTIMA can

be achieved with the following browsers:

•

Google Chrome

•

Apple Safari

lease the button again; after a short pause

the SERVICE-LED stays on for some seconds.

˚ As soon as the SERVICE-LED turns off,

KNX SERVER is reachable under the factory-IP

address ("192.168.0.110")

If the SERVICE-LED stops blinking after the

RESET-button was pressed for the first time

(10 seconds) and before you were able to

press the RESET-button again, please repeat

the whole procedure.