Divus KNX SERVER Manual de instalação - Página 9
Procurar online ou descarregar pdf Manual de instalação para Servidor Divus KNX SERVER. Divus KNX SERVER 20 páginas. Knx systems visualization solution
Imprimir páginahttp://192.168.0.110
This link will directly open the login page of
OPTIMA, where you can login as administrator
with the following login credentials.
Username: admin
Password: admin
After successful login, the configuration menu
can be reached by clicking on the ADMIN-button
in the toolbar of the displayed navigation menu
2.6 RESET OF THE IP ADDRESS
If needed, the IP address of KNX SERVER can
be reset to factory settings through the RE-
SET-button on the bottom side of the device:
˚ Localize the RESET-button on the device and
get a screw driver or a similar tool with a small
diameter to reach the RESET-button through
the small cutout in the housing of the device.
˚ Press the RESET-button until the SERVICE-
LED starts blinking (about 10 seconds); after-
wards release the RESET-button.
˚ Press the RESET-button again within the next
5 seconds for max. 2 seconds and then re-
(
- show/hide navigation menu). Detailed in-
formation about the visualisation and configu-
ration of OPTIMA can be found in the OPTIMA
USER-MANUAL and the OPTIMA ADMINISTRA-
TOR-MANUAL.
The maximum comfort for using/
programming DIVUS OPTIMA can
be achieved with the following browsers:
•
Google Chrome
•
Apple Safari
lease the button again; after a short pause
the SERVICE-LED stays on for some seconds.
˚ As soon as the SERVICE-LED turns off,
KNX SERVER is reachable under the factory-IP
address ("192.168.0.110")
If the SERVICE-LED stops blinking after the
RESET-button was pressed for the first time
(10 seconds) and before you were able to
press the RESET-button again, please repeat
the whole procedure.
9