ClearOne WS880 Skrócona instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla System mikrofonowy ClearOne WS880. ClearOne WS880 15 stron.

Receiver:

FRONT PANEL:

ClearOne receiver main-frames hold either four or eight, independent, 24-bit digital audio receiver modules.

There is a front-panel mixed audio output for headphones or direct recording. Each module shares the main-

frame's two antennas for full-diversity. Receiver main-frames can be daisy-chained together allowing up to

32 channels in an antenna network that shares two antennas. This eliminates the need for external antenna

distribution amps. Main-frames can be connected to form an Ethernet network that monitor and control the

system via a computer. Main-frames also have USB and RS232 connections for serial monitor and control.

1. Antenna Front Mounting Hole: Use back-to-front TNC cables included.

2. Receiver Module (See details below).

3. Mixed audio volume control.

4. USB Port. Connect to computer for ClearOne Remote control. Run software to monitor/edit system

parameters, scan for RF interference and download firmware upgrades.

5. Mixed audio output, 1/4" phone jack for monitoring individual channels or mixed channels.

Note: Factory default for the front panel headphone jack is set for mixed line-level out.

Use ClearOne Remote>Settings>Headphone, to reset for headphones.

6. Power Switch.

MODULE:

Modules are designed for quick and easy field replacement for added redundancy.

BATTERY

CH 1

AUDIO

SLOT 3

AES256

IR Sync LED: Sends IR information to SYNC the receiver and transmitter (SYNC pg. 5).

Pressed at the same time: Sends SYNC signal from receiver to transmitter (SYNC pg. 5).

Status LED:

• Green --> The channel is ON and un-muted

• Red --> The channel is OFF

• Flashing Red --> Encryption key mismatch or, two transmitters are synced

to the same Receiver. Solution: Re-sync receiver with transmitter.

• Amber --> The receiver is muted or GPIO is triggered

RF BARS

ANTENNA DIVERSITY

AUDIO LEVEL

BATTERY LEVEL

CHANNEL NAME

ENCRYPTION

STATUS:

FREQUENCY

(Colored text indicates status)

ON = Green

OFF = Red

MUTE = Amber

KEY = Flashing Red ("KEY" = mismatched encryption key)