Altor ATDAC-10S3 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz Altor ATDAC-10S3. Altor ATDAC-10S3 8 stron.

Technical characteristics:

• SPDIF/TOSLINK format: PCM 44.1/16-192/24

• USB PCM Format: 44.1/16-384/32

• USB DSD Format: 64-128 (DoP) or 64-256 (Native)

• Output Voltage: 2Vrms

• Output impedance: <50 Ohm

• THD: 0.00008%

• IMD: 0.00008%

• SNR: 118dB

• Channels crosstalk: >110dB @ 15kHz

• Auxiliary analogue input nominal voltage: 0.9Vrms (can be changed per user request)

• Auxiliary analogue maximum voltage: 3.0Vrms

• External amplifier control dry contact: 50VDC max (open), 30mA max (closed).

• Power: 115VAC or 230VAC (user's choice before ordering )

• Power consumption: <12W (<4W in standby)

Front Panel:

Front Panel indication and control:

SPDIF/TOSLINK Status: 3 LED (<| [] |>) indicates the status of the serial input and FIFO

Buffer.

If there is no valid signal, the middle LED ([]) flash. It lit continuously during the normal Play. If

because of a difference between the ATDAC and the Source clock frequencies FIFO buffer will

overload, some corrections will be provided. This will indicate by the edge LEDs (<| and |>). Each

Stop condition start FIFO operation from the beginning. So, if you see correction and hear the

sound degradation - simply make Stop and then Play again. Usually, the FIFO depth is enough for

one CD and even more and you will not see the FIFO overloading.

®Altor Co

Altor

A U D I O

Netanya, Israel