Altor ATDAC-10S3 Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Altor ATDAC-10S3. Altor ATDAC-10S3 8 сторінок.
Technical characteristics:
• SPDIF/TOSLINK format: PCM 44.1/16-192/24
• USB PCM Format: 44.1/16-384/32
• USB DSD Format: 64-128 (DoP) or 64-256 (Native)
• Output Voltage: 2Vrms
• Output impedance: <50 Ohm
• THD: 0.00008%
• IMD: 0.00008%
• SNR: 118dB
• Channels crosstalk: >110dB @ 15kHz
• Auxiliary analogue input nominal voltage: 0.9Vrms (can be changed per user request)
• Auxiliary analogue maximum voltage: 3.0Vrms
• External amplifier control dry contact: 50VDC max (open), 30mA max (closed).
• Power: 115VAC or 230VAC (user's choice before ordering )
• Power consumption: <12W (<4W in standby)
Front Panel:
Front Panel indication and control:
SPDIF/TOSLINK Status: 3 LED (<| [] |>) indicates the status of the serial input and FIFO
Buffer.
If there is no valid signal, the middle LED ([]) flash. It lit continuously during the normal Play. If
because of a difference between the ATDAC and the Source clock frequencies FIFO buffer will
overload, some corrections will be provided. This will indicate by the edge LEDs (<| and |>). Each
Stop condition start FIFO operation from the beginning. So, if you see correction and hear the
sound degradation - simply make Stop and then Play again. Usually, the FIFO depth is enough for
one CD and even more and you will not see the FIFO overloading.
©2018.
®Altor Co
Altor
A U D I O
Netanya, Israel