Altox EBUS-5 GPS Podręcznik operacyjny - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik operacyjny dla GPS Altox EBUS-5 GPS. Altox EBUS-5 GPS 4 stron. Gsm

Drukuj stronę

Internet Settings

APN Access Point (ask your mobile provider)

APN User Name (ask your mobile provider)

APN Password (ask your mobile provider)

Internet-application server's IP address

Internet-application server's port

Number of attempts to establish GPRS before reconnect COUNT1:3

Number of attempts to establish TCP before reconnect

Ping frequency in home network, 1-99 sec

Ping frequency in roaming, 0-99 sec (0-OFF)

Tracking mode (committing routes to the system)

Note: after the setting of the APN point, ALTOX module will switch into

GPRS mode. Internet trafﬁc amounts to less than 3MB/month without

rounding off (TRACKING0), in TRACKING1 mode - less than 30MB/month.

Settings for the TRACKING1 mode

Switching threshold moving/parking, km/h

Transmission frequency in motion (0-50km/h), 1-99sec

Transmission frequency in motion (50-100km/h), 1-99s

Transmission frequency in motion (>100 km/h), 1-99sec FREQ3:15

Transmission frequency when parked, 0-9999sec (0-OFF) FREQ4:60

Transmission frequency in motion (roaming), 0-999sec

Transmission frequency when parked (roaming), 0-9999s ROAM2:600

Text SMS with General Settings:

A0 R1 B0 T30,0,0

- HEATER-A0, RSTOP1, BIND0, TIME1/2/3

E10 L0,0,0 F0

- ERRCTRL:10, LTEMP1/2/3, FIXKEY0

P0 S0,0 K0

- PULSEOUT:0, SEPAROUT0, SEPARLINE0, KEEPOUT0

S1:w0,e1,v11.0,t99 - SMSF1, SMSW0, SMSE1, SMSV:11.0, SMST99

C1 P""

- CALL1, PASS: (up to 4 characters)

N1""/N2""/N3""

- NUM1, NUM2, NUM3 - phone numbers cells

B"*100#":10,5:1

- BAL:*100#, BTIMER1:10, BTIMER2:5, TRANSLIT1

Text SMS with ID and Internet Settings:

ID:12345678901234 - Unique Device Identiﬁcator

S"XXX.X.X.X","XXX" - SERVER1:XXX.X.X.X, SERVER2:XXX

G"apn","user","pass" - APN1:apn, APN2:user, APN3:pass

C3,2 P30,30, T0:10 - COUNT1/2, PING1/2, TRACKING0,TMOTION:10

F5,10,15,60 R90,90 - FREQ1/2/3/4, ROAM1/2

Text SMS with GSM Stations Data:

The text message contains 7 cells with data: N, MCC, MNC, LAC and CID.

N - number of cell from 0 to 6 (if a cell is empty, all ﬁelds have value 0),

MCC - country code, MNC - network code, LAC -local area code, CID - cell

ID. LAC and CID ﬁelds values are displayed in hexadecimal notation.

Following voice prompts you should enter a DTMF-command by pressing a

Command

relevant tone button:

APN1:internet

- Switching the autonomous heater ON/OFF – press 1.

APN2:login

- Request account balance – press 2.

APN3:password

- Request heater status – press 3.

SERVER1:X.X.X.X

After a minute the connection is dropped automatically.

SERVER2:XXX

The parking heater will be ON for the speciﬁed in settings time period

(TIME1), and additionally LED on the button installed in the car will be

COUNT2:2

activated.

PING1:30

Control via Button

PING2:30

TRACKING1 /0

The standard ALTOX equipment also includes a button (it is installed if

required in the car's interior). This button controls the heater and indicates

its current working status.

Control via Internet

Command

This option allows controlling the heater in the real-time mode via

TMOTION:10

Internet-app ALTOX HEATER (http://altox.ru/app) using your phone's or

FREQ1:5

tablet's browser. Detailed recommendations on setting up the Internet-app

FREQ2:10

and switching the module to the GPRS mode can be found in the document

«Description of ALTOX HEATER Internet-application».

Attention! If you decide not to use the option of controlling the heater via

ROAM1:90

Internet after switching the module into the GPRS mode, you should switch

the GPRS mode off by sending a text message command «APN1:».

Control via SMS

Send a SMS-command to the phone number associated with the SIM card

installed in the module. Text message commands can be sent from any

phone number. If the password is set (PASS setting), then before entering

any command, you should include its value with no spaces (for example,

«1111START», where 1111 is password, START is an command).

Switch the heater ON (operation time from TIME1)

Switch the heater ON for a time period of ХХmin (10-120) START:XX

Switch OFF the heater

Request a text message (SMS) with the heater status

When setting SEPAROUT1 is activated, the auxiliary output OUT is switched

into a manual control mode (to implement additional options).

Switch ON only the auxiliary output OUT

Switch OFF only the auxiliary output OUT

Heater Control

Auxiliary Output Control

Command

START

STOP

STATUS

Command

ACTIVATE

DEACTIVATE