Acoustical Manufacturing Co. QUAD MULTIPLEX DECODER Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów Acoustical Manufacturing Co. QUAD MULTIPLEX DECODER. Acoustical Manufacturing Co. QUAD MULTIPLEX DECODER 16 stron.
Drukuj stronęOPERATION
Mono
Press RADIO and MON or 2-MON push
buttons. All transmissions \\-ill be heard from
the tuner in the normal way. Stereo broadcasts
will be heard in their mono form, i.e. left and
righthand channels added tog(;ther.
Stereo
Press RADIO and STEREO push buttons.
After the Blue channel power amplifier has
warmed up mono transmissions and interstation
noise will be muted and or.ly stereo trans
missions will be heard. If no signals are audible
when tuning through the VHF band then there
are no stereo broadcasts being transmitted
within range at that time.
Long Distance Reception
Fading and background n0ise are more
apparent when receiving stereo transmissions
from distant stations. The stereu information is
degraded more than the mono channel so that
fading and background noise, if obtrusive, may
be reduced by reverting to Mono reception.
Page 6
SPECIFIC A TION
De-emphasis:
500S (European standards)
750S (North American standards)
Output voltage:
lOOm V (Nominal for 30% modulation)
into lOOK ohms
Crosstalk:
Better than 30 dB at 1 kc/s
Suppression:
19 kc/s Pilot tone better than 36 dB
38 kc/s Switching tone better than 40 dB
Power requirement:
330V DC,
8mA mono (from Yellow
channel HT) plus 9mA stereo (from Blue
channel HT)