ClearSpan PB00566R4 Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Namiot ClearSpan PB00566R4. ClearSpan PB00566R4 18 stron. Freestanding “hut” style model 14' wide x 14' high x 36' long
Drukuj stronęSection B - Rafter Assembly
Step 1: Locate the 6 sections of pipe to make a rafter. This will include two swaged sections labeled
"1" which are straight at one end and curved at the other, two sections labeled "2" and "3"
which are curved throughout but "2" is swaged and "3" is not, and two extensions labeled "X."
Step 2: Fit the sections together starting with section "1" then "2" then "3" and then another "1" to
form an arch laying flat on the ground. Then, add a straight extension "X" to each end. It is
essential to perform this step on level ground or the completed rafter assembly will be twisted.
Step 3: Install the supplied 3/8" hex driver bit into the chuck of your drill/driver.
Typical End Rafter
Page 7