Altrad BELLE WPX 3/30 Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna Altrad BELLE WPX 3/30. Altrad BELLE WPX 3/30 18 stron.
Również dla Altrad BELLE WPX 3/30: Instrukcja obsługi (19 strony)
Drukuj stronę
GB
CAUTION
Before connecting the hose to the Water Pump you must lay the hose out to its full length.
DISCHARGE HOSE INSTALLATION
Use a commercially available hose and hose connector, and clamp provided with the pump.
It is best to use a short, large-diameter hose, because that will reduce fluid friction and improve pump output. A long or small-diameter
hose will increase fluid friction and reduce pump output.
Tighten the hose clamp securely to prevent the discharge hose from disconnecting under pressure.
1.
Discharge Port.
2.
Sealing Washer.
3.
Hose Coupler.
4.
Hose Clamp Ring.
5.
Hose Clamp.
6.
Discharge Hose.
Hose Connection
DO NOT connect either of the hoses to the Water Pump whilst the engine is running. This will cause
extensive damage.
1
2
3
Hose Connector
(Commercially
Available)
10
4
5
6