Altrad BELLE WPX 3/30 운영자 매뉴얼 - 페이지 10
{카테고리_이름} Altrad BELLE WPX 3/30에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Altrad BELLE WPX 3/30 18 페이지.
Altrad BELLE WPX 3/30에 대해서도 마찬가지입니다: 운영자 매뉴얼 (19 페이지)
페이지 인쇄
GB
CAUTION
Before connecting the hose to the Water Pump you must lay the hose out to its full length.
DISCHARGE HOSE INSTALLATION
Use a commercially available hose and hose connector, and clamp provided with the pump.
It is best to use a short, large-diameter hose, because that will reduce fluid friction and improve pump output. A long or small-diameter
hose will increase fluid friction and reduce pump output.
Tighten the hose clamp securely to prevent the discharge hose from disconnecting under pressure.
1.
Discharge Port.
2.
Sealing Washer.
3.
Hose Coupler.
4.
Hose Clamp Ring.
5.
Hose Clamp.
6.
Discharge Hose.
Hose Connection
DO NOT connect either of the hoses to the Water Pump whilst the engine is running. This will cause
extensive damage.
1
2
3
Hose Connector
(Commercially
Available)
10
4
5
6