Altron TROVE Trove2HR2R Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Obudowa Altron TROVE Trove2HR2R. Altron TROVE Trove2HR2R 8 stron. Trove rack enclosure with altronix and identiv backplane

Drukuj stronę

Altronix Trove2R enclosure includes Z Bracket, a convenient and reliable wire management accessory.

Hardware (included):

Twelve (12) bolts and

1. Carefully unpack Z Bracket. Do not discard hardware

(included) (Fig. 3, pg. 4).

2. Attach arms to each other using bolts and

lock nuts (Fig. 4a, pg. 4).

3. Attach the hinge brackets to the ends of

arms using bolts and nuts positioning

them as shown on (Fig. 4b, pg. 5).

4. Make sure that all nuts are tightened.

Fig. 4

Fig. 3b

5. Attach the hinge bracket on each end of Z Bracket, then attache the Z Bracket to the adjustable slide

using bolts and lock nuts

(included) (Fig. 5, 5a, pg. 4).

6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts

(included).

Fig. 5

- 4 -

Z Bracket Installation for Trove2R:

eight (8) lock nuts.

Fig. 5a

Fig. 4a

Fig. 4b

Trove2HR2R Installation Guide

Fig. 3