dji Robomaster S1 Skrócona instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drony dji Robomaster S1. dji Robomaster S1 10 stron.
Również dla dji Robomaster S1: Zrzeczenie się odpowiedzialności i instrukcje bezpieczeństwa (4 strony)

5. Preparing the Gel Beads

Soak the gel beads to the size with a diameter of 5.9 - 6.8 mm. It is recommended

to use pure water, and it will take around 4 hours to finish soaking.

The average load of the gel bead container is around 430 beads. Soak the

appropriate number of gel beads according to actual usage.

A. Fill the gel bead container with the soaked gel

beads.

B. Make sure to clean the remaining water in the

container.

The size of the soaked gel beads may vary when using different types of water.

Make sure to soak the gel beads to the specific size to avoid block the launcher.

6. Preparing the Robot

Installing the Gel Bead Container

Installing and Powering On the Intelligent Battery

Insert the Intelligent Battery, and then press and hold the power button to power

it on.

Removing the Gel Bead Container