dji Phantom 4 RTK Podręcznik często zadawanych pytań - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik często zadawanych pytań dla Quadcoptery dji Phantom 4 RTK. dji Phantom 4 RTK 17 stron. Remote controller
Również dla dji Phantom 4 RTK: Skrócona instrukcja obsługi (10 strony), Zrzeczenie się odpowiedzialności i instrukcje bezpieczeństwa (19 strony), Instrukcja konfiguracji (7 strony)

Do images captured by the Phantom 4 RTK store altitude any information? If so, how is

this data stored? Elevation and relative altitude (relative to your takeoff point) are stored in

photos captured by the Phantom 4 RTK. Absolute altitude can be used for mapping, and

relative altitude can be found in the XMP file.

How can I capture oblique photography when using the Phantom 4 RTK? Oblique

imagery can be captured while flying in the Photogrammetry mode on the GS RTK app. In the

Photogrammetry mode, you can adjust gimbal angle from -90 °to -45° under Camera

Settings for your flight plan.You can only set one gimbal angle value at a time, so for sites

where you want to capture multiple angles you can plan the same mission and just adjust the

camera angle.

Can I create a 3D model or point cloud with third-party software using the images

captured by the Phantom 4 RTK? If yes, what is the accuracy of the model created? Yes,

you can use third-party software to process Phantom 4 RTK image data and create models,

however the accuracy will vary based on the photogrammetric algorithm used. Please refer to

the third-party software provider for more information on expected accuracy.

When there are no Ground Control Points (GCPs), what is the accuracy of the model that

the Phantom 4 RTK data can make? Can the accuracy meet the requirements of 1:500

scale aerial triangulation? The orthoimages created with the images captured by the

Phanton 4 RTK and select reconstruction software have shown an absolute accuracy of

roughly 5 cm, while the accuracy required in 1:500 scale aerial triangulation is less than 30

cm. This means the Phantom 4 RTK's accuracy meets the requirements of 1:500 scale aerial

maps.

Is the Phantom 4 RTK compatible with third-party base stations? No, you cannot connect

third-party base stations to the Phantom 4 RTK or the remote controller via a radio station.

However, you can obtain data from a network RTK server via Ntrip protocol in 4G/Wi-Fi

network environment. Satellite observation data can also be saved in the aircraft for users to

conduct post processed kinematics (PPK) to complete their tasks.

When I collect orthoimages with the Phantom 4 RTK, what may cause inaccuracies in

elevation? Possible causes include:

1. The GCP is set in a different coordinate system or height datum from that of the

Phantom 4 RTK's position. Please make sure they are in the same coordinate system.

2. The Phantom 4 RTK's RTK status is not "FIX". Ensure that the RTK status is "FIX" when

collecting data.

3. The internal camera parameters used by the post processing software are not

accurate.

Purchase the DJI Phantom 4 RTK w/ RTK-2 Mobile Station Combo at www.tigersupplies.com.