dji E800 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria do dronów i quadkopterów dji E800. dji E800 9 stron. Multirotor propulsion system

Drukuj stronę

DJI E800 Multirotor Propulsion System

Self-tightening Propellers (Optional)

1) Select "Self-tightening propeller" in the DJI ESC Assistant. (Refer to 7. Updating your ESCs

Page 7 for details)

2) Remove the two screws (M3) on the top of the motor. Then remove the propeller mount and

securing spring.

3) Attach the propeller with a silver nut onto the counter-clockwise motor (which has a silver

propeller screw). Attach the propeller with a black nut onto the clockwise motor (which has a

black propeller screw).

4) Tighten the propeller by rotating it in the lock direction

5) Remove the propeller by rotating it in the unlock direction

"Quick-release propeller" is set by default. When changing the type of the propeller, be

sure to select the corresponding type in the DJI ESC Assistant.

DO NOT use any thread locker on the propeller or motor threads.

5. Mounting the Motors

Mount each motor to a frame arm according to the size of the assembly hole.

6 × M3-6H

Thread depth

3 mm

Assembly hole on the bottom of the motor

The screw size is M3. Mount the motors using appropriate screws.

Note the thread depth and the size of the screws. Using screws that are too long or too

large may damage the motor.

6. ESC Ports Description

There are two ports on every ESC. They are

LED Port. Identify the marks on the ESC.

19 mm

Data/ESC Firmware Update Port and

4 × M3-6H

Thread depth 4 mm

12 mm

Assembly hole on the top of the motor without

the propeller mount and securing spring

Outer ESC