dji E800 Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria do dronów i quadkopterów dji E800. dji E800 9 stron. Multirotor propulsion system

Drukuj stronę

Ensure your ESC firmware matches the motor you will attach it to. Refer to the tag on back

of the ESC to see the default firmware version.

Mount the outer ESC LED indicators according to your needs.

The Data/ESC Firmware Update Port is used to update the ESC firmware

and adjust the ESC. To do this, visit the official DJI website to download

the DJI ESC Assistant.

http://www.dji.com/product/e800/download

7. Updating Your ESCs

ESC

Unplug any other serial devices connected to your PC before updating. Then follow the instructions below:

1) Download the ESC Assistant installer from the DJI website. Run the installer and follow the

prompts to finish the installation.

2) Connect one end of the USB Connector to the Data/ESC Firmware Update Port. Connect the

other end of the USB Connector to a PC with a Micro-USB cable. Power on the ESC. DO NOT

disconnect until configuration is finished.

3) Run the ESC Assistant and wait for the ESC to connect. Watch the indicators on the bottom of

the screen. When connected successfully, the Computer Connection status will be solid green

and Data Exchange Indicator will blink blue.

4) Click on the [View] page. In the "ESC" section, check the current firmware version and ensure

the installed firmware is the latest version. If not, click the link and follow the prompts to upgrade.

5) The color of the ESC LED indicators, the type of propeller, etc. can also be adjusted through the

DJI ESC Assistant.

The DJI ESC Assistant supports Windows XP, Windows 7 and Windows 8 (32 or 64 bit).

8. ESC LED Indicators & Sound Description

The description is the same for both outer ESC LED indicators and inner ESC LED indicators, as

shown below:

LED Indicators

Yellow, Green blinking in turn

Red or Green blinking slowly

— /

—

Solid Red or Green

USB Connector

Sound

None

1356

None

DJI E800 Multirotor Propulsion System

Description

Motor is being recognized.

Ready.

Motor starts normally.