Custom Dynamics CD-LR-04-R Instrukcje instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Akcesoria motocyklowe Custom Dynamics CD-LR-04-R. Custom Dynamics CD-LR-04-R 3 stron. Luggage rack led light bar
Drukuj stronę
6. Loop approximately 2" of the LED Assembly wires
through the closed end of the guide wire. Fold wires
to secure around the guide wire to enable threading
the wires through the rack tubing. See Figure 3.
7. Carefully pull the straight end of the guide wire to
draw the LED Assembly wires through the rail and
out the forward hole. Detach the LED Assembly
wires from the guide wire after the wires have been
pulled through the front hole. See Figure 4.
8. Install the 2 foam pads on to the top surface of the
light. See Figure 5.
9. Align the LED Assembly to the underside of the Air
Wing Luggage Rack rear crossbar. Figure 6.
10. Using a 9/64 Allen wrench, secure the LED Assem-
bly to the Air Wing Luggage Rack using the provid-
ed Allen Head Bolts and washers.
11. Thread the wire from the LED assembly through the
mounting holt in the Tour Pak lid.
12. Route the LED Assembly wiring harness towards the
front center corner of the Tour Pak. Secure loose wires
with provided wire clips as shown in Figure 7.
7
Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
Installation Instructions - Page 2
2
3
4
5
6
09-2018