Aluprof DC 448 Podręcznik programowania - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik programowania dla Nadajnik Aluprof DC 448. Aluprof DC 448 4 stron.
Również dla Aluprof DC 448: Podręcznik programowania (4 strony)

Aluprof DC 448 Podręcznik programowania
3. OPERATING MODE CHANGE
Press and hold the "P2"
button for 3 seconds. The
mode will be changed.
Manual mode - without time control function,
Automatic mode - with time control function,
Random mode - with time control function with a random selected time within ± 15 minutes to the set automatic time.
4. ACTIVE CHANNEL SELECTION
Switch to automatic or random
mode.
5. SETTING OF THE CURRENT TIME
Switch to manual mode
By pressing the "UP" or "DOWN"
buttons, settings of the
minutes can by change.
2
INSTRUKCJA PROGRAMOWANIA NADAJNIKA DC448
By reapitting procedure
will change mode between:
"Manual",
"Automatic",
"Random".
Select the chosen channel.
Press and hold the "MODE /
K-" button for 5 seconds. Hour digits
will flash.
Press the "MODE / K-" button.
Week day will flash.
Hold down the "OK / K +"
button for 3 seconds, the digit
of the disabled
channel will flash.
By pressing the "UP" or "DOWN"
buttons, you can
change the hour settings.
By pressing the "UP" or "DOWN"
buttons, settings of the
week days can by change.
Holding the "K-" button
again for 3 seconds turns on the
selected channel.
Press the "MODE / K-" button.
Minutes digits will flash.
To approve entered changes
press "OK/K+".
We reserve the right to any technical change.
Valid on 2022.02.09