dlb AIJGO-61 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe dlb AIJGO-61. dlb AIJGO-61 10 stron. Resistance meter

VALUES STORED

LIST POS: x

The value of x indicates the position in the measurement list where the measured

resistance value and the associated temperature and humidity data are placed. The

list can contain up to 20 measurement positions. Once full, it is not possible to store

any more results. In this case, the following message will appear after a long press on

the "MODE" button:

LIST FULL

When the list is full, it is only possible to store another measurement result after

deleting the list, which can only be done by a computer.

Management of measurement results on computer

An AIJGO-61 product can be connected to a computer with a USB-A to mini USB-B

cable. To manage the measurement results on a computer, the driver program

supplied with the device must be installed, which assigns a virtual serial port to the

resistance meter. To do this, run the application „CDM v2.08.30 WHQL Certified.exe"

as administrator which is on the supplied pendrive (Right mouse button -> Run as

administrator). Once the installation is completed, launch the terminal program

(termite-3.1.exe), also available from the pendrive. The application will start after the

installation. You can use the shortcut in the Start menu to launch it later (it is listed

under the name "Termite").

When the terminal program is started, a window similar to the following picture

appears: