dlb AIJGO-61 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe dlb AIJGO-61. dlb AIJGO-61 10 stron. Resistance meter

Maintenance

Replacement of the batteries

If the batteries are discharged, a screenshot similar to the following will be displayed:

31.6 kΩ

LOW BATTERY

24.5°C

42.1%RH

In this case the measuring instrument is automatically set to 10 V measuring voltage.

You can remove the cover plate by unscrewing two screws on the back of the meter

to change the batteries. Be sure to place them in the correct direction to avoid

possible circuit damage.

The measuring instrument uses 10 V, 100 V or 500 V measuring voltage between the

electrode connections. The output current is limited to 1 mA, nevertheless do not

touch the electrodes when measuring with the instrument.

Calibration of the device is recommended once in every 2 years.

The images in this document are for information purposes only. The design, the accessories, the technical

specifications and various details of the product can be changed. We reserve the right to sell such changed

product without notice. In case of improper use other than as described in this documentation or in case of

modification of the product which D és Tsa. Bt. has not given its written consent, our company may reject any

warranty claims.