DLS CRUISE CRPP-BMW1.4 Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Samochodowy system stereo DLS CRUISE CRPP-BMW1.4. DLS CRUISE CRPP-BMW1.4 20 stron.
Drukuj stronęIncluded products:
2pcs Midrange speakers
2pcs Tweeters
2pcs Crossovers HP tweeter
2pcs Crossovers HP midrange
Included in box:
2pcs Plastic adaptors (For type A1 & A2)
2pcs Steel adaptors (For type B1)
2pcs Tweeter adaptors (Type A & B)
2pcs Cable connectors
4pcs Adhesive foam pads
2pcs Rubber gaskets
2pcs EVA gaskets 102mm x 1.5mm
2pcs EVA gaskets 97mm x 1mm
2pcs Foam gaskets 115mm x 13mm
2pcs Foam gaskets 115mm x 4mm
2pcs Sound optimized tweeter brackets
8pcs M3 Scews
1pc Sealing compound
1pc PRY tool
1pc Manual
General info
BMW has many different sound systems and configurations in the same year/model.
This means that there are several different setups that can be installed in the same models
There can be different speakers in the front door, back door, rear shelf, side panel and center
in the dash board.
Before you begin with the installation, take a few minutes to check what kind of speaker you
have in your car. For this reason there can be a need for different tool, such as.
• Bit screwdriver
• Bit mini ratchet
• T15/T20 Torx bit
• Hex bit
• Philips bit
• Size 8mm & 10mm wrench
• Plastic PRY tool
• Narrow screwdriver
Remember: Use plastic PRY tool to avoid marks on the panels or damaging the plastic clips.
Take your time and don't rush things. Don't use brutal force to remove a grill, trim or door
panel.
Pre installation
Disconnect Battery
Before you start the pro-
cess of replacing speakers,
disconnect and secure the
negative terminal from
your battery/power source.
This will prevent the risk
of damaging yourself or
the products.
Place the disconnected terminal in a secure and
isolated location away from any possible
connection belonging to the battery/power source
system.
2