Dodge charger 2018 Skrócona instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Samochód Dodge charger 2018. Dodge charger 2018 17 stron.

Drukuj stronę

Dodge charger 2018 Skrócona instrukcja obsługi

ally override the haptic warning by applying torque

into the steering wheel at any time. When only a

single lane marking is detected and the driver

unintentionally drifts across the lane marking (no

turn signal applied), the LaneSense system pro-

vides a visual warning through the instrument

cluster display to prompt the driver to remain

within the lane. When only a single lane marking is

detected, a haptic (torque) warning will not be

provided.

NOTE:

The LaneSense system can be customized and

turned off through the Uconnect System touch-

screen.

For further information, and applicable warnings

and cautions, please refer to the Owner's Manual at

www.mopar.com/en-us/care/owners-manual.html

(U.S. Residents) or www.owners.mopar.ca (Cana-

dian Residents).

Forward Collision Warning With

Mitigation — If Equipped

The Forward Collision Warning (FCW) system can

provide the driver with active braking, audible and

visual warnings (within the instrument cluster dis-

play) and may apply a brake jerk to warn the driver

when it detects a potential frontal collision. The

warnings and limited braking are intended to pro-

vide the driver with enough time to react and avoid

or mitigate the potential collision.

The system status can be selected to: "Off", "Only

Warning", and "Warning & Braking". "Warning &

Braking" status with "Medium" sensitivity are the

default settings, but can be changed within the

Uconnect settings under "Safety and Driving

Assistance".

FCW monitors the information from the forward-

looking sensor, as well as the Electronic Stability

Control (ESC) system and wheel speed sensors, to

calculate the probability of a collision. When the

system determines that a collision is probable, a

warning message (both audible and visual) will be

displayed within the cluster display along with a

brake jerk warning (previously enabled in the

Uconnect Settings). When the system senses the

driver applying the brakes to avoid a probable

collision, additional brake force will be provided to

the vehicle. When the system determines a colli-

sion with the vehicle in front of you is no longer

probable, the warning message will be deacti-

vated.