DOEPFER A-100 Series Podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt nagrywający DOEPFER A-100 Series. DOEPFER A-100 Series 6 stron. Analog modular system, connecting the breakout module to the main module
Również dla DOEPFER A-100 Series: Instrukcja obsługi (8 strony), Podręcznik (16 strony), Podręcznik użytkownika (12 strony), Instrukcja montażu i okablowania (6 strony), Podręcznik (8 strony), Podręcznik (8 strony), Łączenie (8 strony)

Drukuj stronę
DOEPFER A-100 Series Podręcznik
A-129 /5
Voiced/Unvoiced Detector
$ Unvoiced Input
This unvoiced carrier signal input $ is used to patch
in the sound source you wish to use for the carrier
signal for unvoiced sounds.
As a rule, you'd tend to use the output from a noise
module (A-117, A-118), a high-frequency sawtooth
wave, or the 6 Oscillator output from an A-117 mo-
dule.
% Voiced Input
This voiced carrier signal input % is used to patch in
the sound source you wish to use for the carrier
signal for voiced sounds.
Usually, you'd tend to find a low-mid frequency VCO or
mix of several VCOs doing this job.
& Voiced / Unvoiced Output
Depending on the status of the voiced/unvoiced detec-
tor switching, output & relays the input signal from
socket $ or %.
4
System A - 100
5. User examples
Vocoder block diagram including A-129 /5
The way the A-129/5 should be patched into the whole
vocoder system is shown in fig. 2 (see next page).
Smoothing Voiced / Unvoiced transitions
Whereas the A-129/5's internal switch produces an
abrupt change from voiced to unvoiced carrier and
vice versa, it's possible to patch the gate output to a
slew limiter, invert one of the carrier VCAs, and pro-
duce a smooth transition.
Gate Out
A-129 /5
A-170
fig. 1: smoothing the change of carrier signals
doepfer
A-117
A-130
A-118
A-110
A-130
A-111
A-175
A-138
to
Speech Input
of A-129 /1