Doepke Dupline DSM 2 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przekaźniki Doepke Dupline DSM 2. Doepke Dupline DSM 2 8 stron. Two-way relay output with semiconductor outputs

Drukuj stronę
Doepke
The following table shows the allocation of terminals:
Terminal
1.1
Switching ch. 1 (L
1.5
Switching ch. 1(L
2.1
Switching ch. 3 (L
2.5
Switching ch. 4 (L
1.3
Dupline signal conductor -
(Dupline-)
1.4
0 VDC operating voltage
In order to meet the requirements for protective low voltage, VDE0100, Part 410, should
be observed and put into practice during installation.
When connecting please observe that the maximum torque of the terminals of 0.6 Nm
will not be exceeded.
The patented click-and-lock-mechanism allows an easy removal of the unit from the rail
by pushing the housing upwards until it is released.

10. Indicators

Indicator
Green "BUS OK"
LED
2 red LED „EIN"

11. Technical Data

Dupline
Semiconductor outputs
Load capacity (per output)
Relay outputs
Load capacity (per output)
Load capacity (per output)
6
Description
)
IN
)
OUT
/L
)
IN
OUT
/L
)
IN
OUT
Dupline bus:
Off - bus fault / On - bus OK
All-or-nothing relay 1/2:
Off - Relay open / On - Relay closed
Current input
Input channels None
Output channels 6 control channels (2 relay / 4 semiconductor
Type PNP transistors, switching to 0 V
Output voltage
Type All-or-nothing relay
Voltage
Voltage
3931170/02/05/E
Terminal
1.2
Semiconductor-Output C5
1.6
Semiconductor-Output C6
2.2
Semiconductor-Output C7
2.6
Semiconductor-Output C8
1.7
Dupline signal conductor + (Du-
pline+)
1.8
+24 VDC operating voltage
Description
Min.
outputs)
21.5 VDC
12 VAC
100 mA
12 VDC
100 mA
Description
Typ.
10 µA
24 VDC
26.5 VDC
50 mA
250 VAC
30 VDC
Max.
16 A
10 A