Cyklos GPM 450 SA Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Bindownica Cyklos GPM 450 SA. Cyklos GPM 450 SA 14 stron. Semi-automatic creasing and perforating machine

Drukuj stronę

Operating Instructions | GPM 450 SA

against the slide. We do it by pressing the „Move" icon and the following menu comes up –

"Manual control" (fig. 7).

Fig. 7: Manual control

After activating the „1 turn" icon the control upstroke is carried out. In case the crease depth is not

the same on the both sides of the paper or perforation does not result in direct separation of the

paper, we can adjust the ram (14) with a perforation knife. This can be done using the adjusting

screws (18). It is necessary to loosen the screws gradually anticlockwise (slide goes down) by

1/12 of the turn (30°), and then secure it with a nut. You should check the quality of perforation

after each turn (30°). After the machine has been adjusted for perforation, it is adjusted for

creasing as well.

Icons „Forward" and „Backward" are used to release stuck piece of paper from the machine.

For return to the main menu, press „Return".

7.8

Service Menu

There is a hidden icon in the right upper corner. This icon serves for service technicians trained by

Cyklos. To access this icon you need to enter a password (fig. 8).

Fig. 8: Service screen