Cyklos GPM 450 SA Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Bindownica Cyklos GPM 450 SA. Cyklos GPM 450 SA 14 stron. Semi-automatic creasing and perforating machine

Drukuj stronę

Operating Instructions | GPM 450 SA

8. THE MOST COMMON FAULTS (TROUBLESHOOTING)

a) upstroke stoppage: If this problem occurs during adjusting and checking the upstroke of the

ram (14), it is necessary to loosen locking nuts and then turn clockwise by the adjusting screws

(18) two revolutions (the ram goes up). When the upstroke cycle is terminated, then the red diode

is on. After the machine is turned back on the upstroke process should finish. It is necessary to

readjust the ram (14).

b) paper jam: When the paper gets jammed or damaged, it is necessary to turn the machine off

immediately (press the STOP button 8). After the machine has been stopped we have to tap on the

MOVE icon. Before we remove the paper it is necessary to carry out an upstroke (1 turn icon).

Then we can use button Backward or Forward depending on situation.

c) crease is in incorrect position compared to values set on display

It is necessary to respect recommended width of creasing channel for different paper thickness. If

we use inappropriate width of crease (usually narrow creasing channel for thick paper)

inaccuracies in position of crease may appear, crease will be placed in different distance than what

we set on display. If we use thick paper in combination with narrow crease, the result is that the

paper is pressed into the creasing channel, the rollers start to slip trying to release the paper. Use

wider crease in such case. Look for correct crease width in chapter 2, c.

9. MACHINE DISPOSAL

When the lifetime period is over, it is forbidden to dispose of the machine into the common waste.

The machine must be disassembled and metallic, non-metallic, plastic, rubber and electronic parts

sorted. These parts are disposed of in the relevant points of recycling. Some parts of the machine

can contain dangerous substances that are harmful to the environment and health.