CYP PU-507RX-SCD Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik CYP PU-507RX-SCD. CYP PU-507RX-SCD 20 stron. 5-play hdbaset receiver with integrated video scaling & audio breakout (inc. poe & single lan, up to 100m) - stereo audio only
Również dla CYP PU-507RX-SCD: Instrukcja obsługi (18 strony)

Drukuj stronę

COMMAND

S SATURATION 0~60

R SATURATION

S SHARPNESS 0~30

R SHARPNESS

S NR 0~3

R NR

S AUDIO DELAY 0~3

R AUDIO DELAY

S AUDIO MUTE 0/1

R AUDIO MUTE

S KEY LOCK 0/1

R KEY LOCK

S RESET 1

Note:

1. RS-232 commands will not execute unless followed with carriage return

and LF (Line Feed).

2. Commands are case-insensitive.

3. Resolutions 1~16 are RGB encoded and 17~25 are YUV encoded.

4. Digital audio supports LPCM 2CH only, please ensure the source input audio

is set to send LPCM 2CH audio in order to avoid unwanted audio noise.

DESCRIPTION

Sets the numerical value for the

SATURATION setting (0~60)

Reports the numerical value for the

SATURATION setting (0~60)

Sets the numerical value for the

SHARPNESS setting (0~30)

Reports the numerical value for the

SHARPNESS setting (0~30)

0=OFF

1=LOW

Reports the numerical equivalent for the

NOISE REDUCTION setting (as listed above)

0=OFF

1=40ms

Reports the numeric equivalent for AUDIO

DELAY setting (as listed above)

0=ON

Reports the numeric equivalent for AUDIO

MUTE setting (as listed above)

0=ENABLE

Reports the numeric equivalent for KEY

LOCK setting (as listed above)

Checks the FIRMWARE version

Sets the numerical equivalent for the RESET

setting (as left)

2=MIDDLE

3=HIGH

2=110ms

3=150ms

1=MUTE

1=DISABLE