CYP CHDBT-1H3CE Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kable i złącza CYP CHDBT-1H3CE. CYP CHDBT-1H3CE 16 stron. 1×4 hdmi over hdmi and cat5e/6/7 splitter with poe and lan serving
Również dla CYP CHDBT-1H3CE: Instrukcja obsługi (13 strony)

Drukuj stronę

• Certified CAT5e/6/7 cables

• HDBaseT™ Receivers (e.g. CH-507RX or CH-1109RX)

5. FEATURES

• HDMI with 4K×2K resolution and 3D support, HDCP and DVI

compliant

• Simultaneous HDMI and CAT5e/6/7 outputs

• Supports data rate from 300 Mbps up to 3 Gbps

• Supports a wide range of PC resolutions from VGA to WUXGA

(RB) and HDTV resolutions up to 4K×2K (3840×2160@30 Hz and

4096×2160@24 Hz)

• Supports transmission of High Definition audio: LPCM 7.1CH, Dolby

TrueHD, Dolby Digital Plus and DTS-HD Master Audio (32 kHz~192 kHz

sample rate)

• Supports distances up to 100 meters over CAT5e/6/7 cables

• Supports Ethernet network rates up to 100 Mbps

• Supports selection of Standard or TV EDID settings

• Supports PoE with compatible receiver units

• Supports control of devices via 2-way IR

• 3D signal display is dependent on the TV/Display's EDID settings

Note:

This system was tested with CAT6/23AWG cables, results may vary

with cables of a different specification.

The PoE function is designed for powering compatible Receiver

units only, non-PoE Receivers will need their own power supply.

Receivers of another brand may not be compatible.

For playback of 4K × 2K HDMI source signals, a 4K × 2K capable

display and High Speed HDMI cables are required.