Ashly neWR-5 Podręcznik użytkownika

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pilot zdalnego sterowania Ashly neWR-5. Ashly neWR-5 6 stron. Programmable ethernet based remote control unit
Również dla Ashly neWR-5: Instrukcja obsługi (4 strony), Instrukcja obsługi (4 strony)

Drukuj stronę

Ashly neWR-5 Remote Control User Reference

Introduction

The neWR-5 is a programmable ethernet based remote control

unit for all Ashly NE (network enabled) products, including NE pro-

cessors, NE power amplifiers, Pema amplifiers, and nX networked

amplifiers. This remote brings control features such as preset recall/

scroll, mute, zone source selection, individual channel and matrix

point level control, and logic output control throughout a building

wherever there is a network connection. All programming is done

across the network using Ashly Protea

This device complies with part 15 of the FCC Rules for class A operation, and is subject to the

following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation.

Features

The neWR-5 is designed to mount into a standard earth ground-

ed North America electrical wall box. A decora cover plate (not

included) can be purchased at hardware stores to cover the neWR-5

electrical box and satisfy the aesthetic needs of the installation.

Connecting and powering the neWR-5 requires Cat-5 ethernet

cable and a IEEE 802.3af Power over Ethernet (PoE) switch, hub, or

inline PoE injector. If PoE is unavailable, a 15-48VDC power sup-

ply capable of at least 2 watts per neWR-5 can be hard wired to a eu-

roblock connector on the back of the remote. The RJ-45 connector

has a green LED to indicate an Ethernet connection has been made,

and a yellow LED to indicate data is being transferred. There is a

hard-wired Lock-Out feature on the neWR-5, where the closing of a

switch wired to the lockout euroblock renders all buttons inactive.

The neWR-5 has six programmable function buttons which can

light up green, red, or amber to display status. To the right of the func-

tion buttons is a pocket in the mylar overlay for a paper function label to

be inserted. The two other buttons are used to adjust function parame-

ters such as gain or preset number, and are indicated by the LED display.

Hardware Installation

The neWR-5 Ethernet control connection is made using an RJ-45 terminated eight conductor

cable connected directly to a computer, or indirectly over a standard 10/100M Ethernet network.

Maximum cable distance for Ethernet is 100 meters from the nearest hub or switch for copper

585-872-0010

software.

FCC Compliance

Ashly Audio Inc

847 Holt Rd

toll free 800-828-6308

Webster NY 14580

fax 585-872-0739