BlueParrott C400-XT Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zestawy słuchawkowe BlueParrott C400-XT. BlueParrott C400-XT 19 stron.
Również dla BlueParrott C400-XT: Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (4 strony)
Drukuj stronę
GETTING STARTED
(continued)
Manual Pairing
If the C400-XT has already been paired with another device and you are not going to use NFC Pairing,
you will need to put it into Pairing Mode manually:
Placing Headset into Pairing Mode
By Voice:
Activate headset voice recognition by pressing the Parrott Button or by pressing and holding the Volume
Up button . Then, after the prompt, say "pair mode ." The headset will enter pairing mode and be visible for
pairing to devices for 120 seconds .
Using Buttons:
With the headset powered off, press the MFB until the light rapidly flashes blue and you hear the audio
prompt "power on ." Keep holding the MFB for approximately 10 seconds until you hear "Pair Mode ."
The headset will be visible for pairing to devices for 120 seconds .
Pairing to a Cell Phone
1 . Make sure that other Bluetooth devices are turned off or out of range .
2 . Place the headset into pairing mode .
3 . Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer's instructions .
4 . Select "BP C400-XT" to pair . (Passcode is "0000" if needed .)
5 . Accept the phone book access request to enable caller ID in the headset .
6 . When connected, the headset will give you the voice prompt, "Your headset is connected ."
BlueParrott C400-XT User Guide
PAGE 10