Ega Master 57666 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Ega Master 57666. Ega Master 57666 18 stron. Máquina de calibración de par

Ega Master 57666 Instrukcja obsługi
This machine is designed to be installed in office-type facilities, well lit, on a table, powered
by a conventional 16A Schuko socket for domestic or office installations protected by a <16A
circuit breaker and 30mA differential.
Order and Cleanliness
he machine must have its own minimum accessory elements. Use a cotton cloth to clean it
and in case of dirt, slightly moistened with soapy water.
Identification plate present and legible
Model, CE Marking and Manufacturer.
Wear
-
There should be no strange noises .
-
The crank should turn between stops smoothly and without squeaks.
Corrosion
There can be no corrosion. It is a machine for office use in a dry environment.
If in doubt, contact the manufacturer for review and maintenance.
- DO NOT use this machine for tests that do not correspond to its intended use.
- DO NOT use the machine if you doubt its condition.
- DO NOT overload the machine or the sensors. Take into account the ranges of the sensors.
8
DESCRIPTION OF INTENDED USE
THE FOLLOWING POINTS MUST BE VERIFIED
REASONABLY FORESEEABLE MISUSE