Ega Master EGATRONIK Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Ega Master EGATRONIK. Ega Master EGATRONIK 17 stron. Non-contact ac voltage detector
Również dla Ega Master EGATRONIK: Instrukcja obsługi (16 strony), Instrukcja obsługi (13 strony)
Drukuj stronę
The next measurement is added to the previous one, then press the button
measured value is shown and the result is shown automatically.
subtracted from the previous one. Then press the button
line with the previous value in the second line. Operate the above steps repeatedly, the meter will
add or reduce cumulatively.
Press once. The
Press
button to take the first length measurement (e.g. length).
Press
again to take the second length measurement (e.g. width).
After taking the second measurement, the area/surface is automatically calculated and displayed
in the summary line. The last individual measured value is indicated at the second line in the
display.
For volume measurements, push button
measurement appears in the display.
Afterwards, Press this button
Press this button
Press button
After taking the third measurement, the volume is automatically calculated and displayed. The
last individual measured value is not displayed.
when measuring heights that require the measurement of two or three
measurements ,as following step:
6
ADDITION / SUBTRACTION DISTANCE MEASURING.
The last step is cancelled.
symbol appears in the display.
to measure the length.
for width.
to take the height,
INDIRECT MEASUREMENT
USING 2 MEASUREMENTS
FUNCTIONS
, the result is shown in the summary
AREA
VOLUME
twice until the
, the second
The next measurement is
indicator for volume