Asko DW95 Podręcznik - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik dla Zmywarka Asko DW95. Asko DW95 19 stron.

ELECTRICAL FUNCTION

CONTROL UNIT

DW951, 952, 95C has an electro-mechanical timer.

The circulation pump consists of an asynchronous motor and pump,

constructed in an integrated unit. A 4 µF capacitor is fitted to ensure

reliable starting of the circulation pump.

OUTLET PUMP

The outlet pump consists of a synchronous motor and pump, constructed

in an integrated unit.

Depending on model, there are three types of inlet valves:

1. With safety valve: Two solenoids independant from each other or valve

seats are connected to a unit.

2. Single-unit type: A solenoid and valve seat.

3. Softener valve: Two valves in shunt, one for the regeneration of the softe

ner and the other for normal inlet.

HEATING ELEMENT

Heating elements with the following capacities: 1800 W alt. , 2500 W

Different thermostats are mounted, depending on model:

30/70°C

64153°

60°C

HIGH TEMPERATURE CUTOUT

Thermostat with switch-off-function at 88°C, 190°F prevents the heating

element from remaining continously energised if the control unit or the timer

should fail.

DW 950 / 951 / 952 / 95C

Thermostat with two switch-off functions with the temperatures

30°C (reset at 22°C) and 70°C (reset at 62°C) for temperature

stop in pre-wash or drying, respectively.

Thermostat with two switch-off functions with the temperatures

64° C (reset at 56° C) and 53° C (reset at 45° C) for temperature

stop in main wash and last rinse at high, or low temperature,

alternately.

Thermostat with oneswitch-off functions with the temperatures

60°C (reset at 52°C) for temperature stop in main-wash and last

rinse on models without temperature selction.