ACR Electronics FPR-20 PROGRAMMER Manual de apoio ao produto - Página 5

Procurar online ou descarregar pdf Manual de apoio ao produto para Acessórios ACR Electronics FPR-20 PROGRAMMER. ACR Electronics FPR-20 PROGRAMMER 15 páginas. Field programmer reader

Imprimir página

• 1 available serial port.

• Printer (optional)

SECTION 4 – INSTALLING THE FPR-20 SOFTWARE

4.1

Downloading FPR-20 Software

The FPR-20 software may be downloaded from the web at

http://www.acrelectronics.com/download.html

1) Click on the fpr20.zip file.

2) A file download window will pop up, select Save.

3) A Save As window will pop up, select a folder on your C drive to save this zip

file.

4) Once the file has finished downloading, open the folder that you saved the file in

and unzip it onto your hard drive. You will need to have WinZip 6.0 or higher

installed on your computer in order to extract this file. If you do not have this

program, you can download a free sample version at www.winzip.com.

5) If you have a previous version of the FPR-20 software installed, delete the

existing directory, C:\FPR20 and its contents.

6) When attempting to unzip this file, you must enter a password under the options

menu, then extract the file to the hard drive. To obtain a password, call ACR at +1

954 981 3333 ext 113, or email [email protected].

7) Now the software is ready to be installed. Typically, once WinZip has expanded

the files it will start to run the setup program for you. Select the OK button and

follow the installation instructions. This will save the file to your C drive and

create a separate folder for it called FPR20.

a. If the program does not start the installation, select the START button,

b. Type C:\setup.exe. Select OK.

c. Alternatively, use the file manager or Windows Explorer to find the

4.2

FPR-20 Software CD

If you have been provided with the FPR-20 installation CD you do not need to download

the software off the ACR website. The setup program will install all of the needed files to

your hard disk automatically. The software must be installed in the C:\FPR20 directory

to work correctly. This directory is the default directory in the setup program. If you

have a previous version installed, delete the existing directory, C:\FPR20 and its contents.

1) Place the CD in the appropriate drive of your computer.

2) Click the START button on the bottom of your Windows operating system. And

select "RUN."

scroll up to the RUN program and select.

setup.exe file on C:\, double click on setup.exe, and follow the installation

instructions.

Y1-03-0181 Rev. A