BARLOW TYRIE 9111210 Manual de instruções de montagem - Página 11

Procurar online ou descarregar pdf Manual de instruções de montagem para Mobiliário de pátio BARLOW TYRIE 9111210. BARLOW TYRIE 9111210 16 páginas. Pavilion with cabrio folding roof

Imprimir página
Anchoring the pavilion
Permo
Lock Anchoring System
®
Top View
www.teak.com
Position your assembled
structure on the chosen
location then mark the
center of each corner plate
Insert the assembled
Permo Lock anchor
into the drilled hole
Unscrew the coupling
and rod completley
from the fixed Permo
Lock anchor and
remove the two
washers
BA R LO W T Y R I E
x1
coupling
x4
bolt
x4
washer
x4
lock washer
x1
x4
rod
anchor
19¾"
(50cm)
quality since 1920
Packaging Contents
One Permo Lock anchor comes
preassembled and ready to use
as shown on the right. Verify that
the rod end is flush with the end
of the anchor.
Drill a 1" x 19¾" (2.5cm x 50cm)
hole at each marked location
using a percussion drill with a
diamond tip masonry drill bit
3-1/4" (8.2cm)
Screw in the coupling nut without
turning the rod and anchor.
The maximum opening of the
Permo Lock anchor occurs when
the rod extends 3¾" (8.2cm)
above the coupling nut
Apply grease on threads
Place the corner of the structure
over the anchor and afix it using
the supplied ½" bolt and washers.
Grease the threads of the bolt
Page11 of 16