Domus MURO-30S-B-W Manual de instalação - Página 2

Procurar online ou descarregar pdf Manual de instalação para Destaque Domus MURO-30S-B-W. Domus MURO-30S-B-W 4 páginas. Spotlight with sensor

1. Refit the Cable Anchorage

2. Fit main body onto the Backcover. Adjusting the light direction you desired, then tighten the screws.

3. Switch the main power on.

252mm

6x27mm PA4x30mm

Notes for electrician

• The LED lamp should be wired to its own light switch.

• Do not interconnect with other lights on the same switch.

• Earth connection must be required.

• Multiple (More than one) Muro fittings must not be wired to a

separate sensor.

• Multiple Muro Fittings cannot be wired to a single switching point.

Understanding the controls

Adjusting the duration time:

The length of time that remains switched on after activation can be

adjusted from (10±5) seconds to (4±1) minutes. Rotating the TIME

knob + to - will reduce the duration time.

Note: Once the light has been triggered by the PIR sensor any subsequent detection will start the timed period

again from the beginning.

187mm

29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia

Phone: 02 9554 9600

OFF

Fax: 02 9554 9433

www.domuslighting.com

Installation Manual

Ø6mm

30mm

TIME

SENS

LUX

Control Knob