eKey Uno Manual de início rápido - Página 4
Procurar online ou descarregar pdf Manual de início rápido para Scanner eKey Uno. eKey Uno 6 páginas. Fingerprint scanner, wireless
Também para eKey Uno: Manual de início rápido (12 páginas), Manual de início rápido (6 páginas)
Imprimir página
Attach the mounting plate in the previously selected
mounting position. You can glue on the mounting plate or
fix it with the supplied screw anchors and screws.
*NOTE ON THE GLUE VARIANT:
Remove the entire base foil. Thoroughly clean the surface where the device is to
be mounted. Adhere the mounting plate only to a smooth, dry surface at room
temperature. Apply a large amount of pressure to the surface to adhere the
mounting plate. The bond only reaches maximum adhesive strength after 3 days.
Only then can the mounting plate be fully loaded.
For further information, visit:
www.ekey-uno.net/en/faq-find-the-right-answer-to-your-question-quickly.
Remove the cover from the ekey uno
5
Slide up and tilt to one side
Open the metal clamp and remove the bottom cap
6
7
Thread cable through and connect*
Then fasten the ekey uno to the mounting plate
using the screws provided
* Connect at 1 and 2
The polarity (+/-) is not relevant