eKey Uno Посібник із швидкого старту - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Сканер eKey Uno. eKey Uno 6 сторінок. Fingerprint scanner, wireless
Також для eKey Uno: Посібник із швидкого старту (12 сторінок), Посібник із швидкого старту (6 сторінок)

Attach the mounting plate in the previously selected

mounting position. You can glue on the mounting plate or

fix it with the supplied screw anchors and screws.

*NOTE ON THE GLUE VARIANT:

Remove the entire base foil. Thoroughly clean the surface where the device is to

be mounted. Adhere the mounting plate only to a smooth, dry surface at room

temperature. Apply a large amount of pressure to the surface to adhere the

mounting plate. The bond only reaches maximum adhesive strength after 3 days.

Only then can the mounting plate be fully loaded.

For further information, visit:

www.ekey-uno.net/en/faq-find-the-right-answer-to-your-question-quickly.

Remove the cover from the ekey uno

Slide up and tilt to one side

Open the metal clamp and remove the bottom cap

Thread cable through and connect*

Then fasten the ekey uno to the mounting plate

using the screws provided

* Connect at 1 and 2

The polarity (+/-) is not relevant