Dongguan Binshi BTA007 Manual de início rápido - Página 3

Procurar online ou descarregar pdf Manual de início rápido para Adaptador Dongguan Binshi BTA007. Dongguan Binshi BTA007 6 páginas.

5、Clearing the pairing lists
After it is been changed the mode, it will clear the pairing information
left by the last mode.
Tips: after the clearing of the pairing information, please delete or
ignore the pairing information on the phone in case you fail to pair it.
6、Audio interface change
After it is been changed the mode, it will clear the pairing information
left by the last mode.
Tips: after the clearing of the pairing information, please delete or
ignore the pairing information on the phone in case you fail to pair it.
7、Reset
Short press the Reset key
8、Low battery and power off automatically
When the battery is low the red light will blink. When the voltage of
the battery is below 3.1V, the adapter will be power off automatically
9、 Charging
When you insert it into the Micro USB, the adapter will reset the
chipset first (can solve the problem of crash) and then charge itself.
10、Use under charging
When you insert the adapter to the socket, you can turn it on and
use the adapter normally. However, we don't advise to use this
function considering the life of the battery
11、 Multi-points supported function/ function of connecting two
devices one time
When you insert it into the Micro USB, the adapter will reset the
chipset first (can solve the problem of crash) and then charge itself
1) TX MODE
Choose TX mode after turn it on, and let the first Bluetooth device, say BYZ YS 008, get into
pairing mode (Long press the MFB button of YS008 at least 6 seconds until see the alternative
flash of red and blue light). The green light is on after successful pairing (supports APTX,
APTXLL green light is on and doesn't support blue light on). Double click MFB button of the
adapter, the green LED light of adapter blinks quickly, get the second Bluetooth device, say
BTA007, to enter into the pairing mode (Long press the MFB button of BTA007 until see the
alternative flash of red and blue light) wait several seconds, it will connect the second device
automatically. After successful connection, the blue LED light is on. Tips: when it connects two
devices, CODEC will automatically change into SBC mode because of the speed of transmission.
2) RX mode
Choose X mode after turn it on, turn on the first cellphone or another Bluetooth device, and
search and choose BTA007 to connect. After connected, double click the MFB button to
disconnect the first cellphone or other connect Bluetooth device and enter into the pairing mode
again. Make the second cellphone or another Bluetooth device enter into Bluetooth stage; search
and connect BTA007. After connection, turn on the first Bluetooth device and choose BTA007 in
your paired list to connect. And then two cellphones or other Bluetooth devices connect to the
adapter successfully.
7