AMERITRON SDC-103 Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Controlador AMERITRON SDC-103. AMERITRON SDC-103 13 páginas. Automatic screwdriver antenna controller for icom radios

Imprimir página

SDC-103 Automatic Screwdriver Controller (ICOM)

Introduction (A)

Controller with six wires.

The SDC-103 Screwdriver Antenna Controller will automatically adjust the

resonant frequency of a screwdriver antenna. The controller reads the CI-V

frequency data from a compatible ICOM radio. The controller then adjusts the

resonant frequency of the antenna. Three pre-selected antenna positions can also

be stored by the SDC-103. An antenna sensor is required for the counter and

automatic operation to function properly. This controller is compatible with

single and dual sensor antenna setups. If your antenna does not have a sensor

installed, contact the antenna manufacturer or MFJ.

Features

•

Automatic Antenna Tuning when connected to an ICOM radio

•

3 Programmable Presets

•

Manual UP/DN buttons

•

Current Sensor Trip for Antenna/Motor Protection

•

Auto-Park: Lowers antenna to lowest position and zeros counter

•

Powered From 12V Vehicle Supply

•

Power: Push button switch powers the controller on and off.

•

Up: Moves the screwdriver antenna up.

Down: Moves the screwdriver antenna down.

•

Setup: Top bank of preset buttons.

•

Skip: Bottom bank of preset buttons.

Enter: Bottom bank of preset buttons.

•

Instruction Manual