AMERITRON SDC-103 Руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Контроллер AMERITRON SDC-103. AMERITRON SDC-103 13 страниц. Automatic screwdriver antenna controller for icom radios
Печатать страницу
SDC-103 Automatic Screwdriver Controller (ICOM)
Introduction (A)
Controller with six wires.
The SDC-103 Screwdriver Antenna Controller will automatically adjust the
resonant frequency of a screwdriver antenna. The controller reads the CI-V
frequency data from a compatible ICOM radio. The controller then adjusts the
resonant frequency of the antenna. Three pre-selected antenna positions can also
be stored by the SDC-103. An antenna sensor is required for the counter and
automatic operation to function properly. This controller is compatible with
single and dual sensor antenna setups. If your antenna does not have a sensor
installed, contact the antenna manufacturer or MFJ.
Features
•
Automatic Antenna Tuning when connected to an ICOM radio
•
3 Programmable Presets
•
Manual UP/DN buttons
•
Current Sensor Trip for Antenna/Motor Protection
•
Auto-Park: Lowers antenna to lowest position and zeros counter
•
Powered From 12V Vehicle Supply
•
Power: Push button switch powers the controller on and off.
•
Up: Moves the screwdriver antenna up.
Down: Moves the screwdriver antenna down.
•
Setup: Top bank of preset buttons.
•
•
Skip: Bottom bank of preset buttons.
Enter: Bottom bank of preset buttons.
•
© 2006 Ameritron
Instruction Manual
1