Canon PIXMA MP495 Series Manual de configuração de rede - Página 11
Procurar online ou descarregar pdf Manual de configuração de rede para Impressora tudo em um Canon PIXMA MP495 Series. Canon PIXMA MP495 Series 24 páginas. Cartridge reset
Também para Canon PIXMA MP495 Series: Manual de instalação (22 páginas), Manual da rede (20 páginas), Manual (8 páginas), Manual de configuração de rede (9 páginas), Manual (4 páginas)
Imprimir página
- 1. Table of Contents
- 2. The Target Access Point Is Not Displayed (Detected) on the Detected Access Points
- 3. Set Printer Ip Address Screen Is Displayed
- 4. The Machine Is Not Displayed (Detected) on the Detected Printers List Screen
- 5. Problems During Network Setup
- 6. Configuring Wireless Lan Settings Manually
- 7. Other Troubleshooting Tips
- 8. Restoring the Machine's Default Lan Settings to Perform Setup Again
Restoring the Machine's Default LAN Settings to Perform Setup Again
Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Press the Maintenance button 14 times.
•
The screen shown to the right appears.
2
Press the Black button or the Color button.
The LAN setting of the machine is now restored to the default state.
•
Perform setup again by following the procedures from "6 Set Up a Wireless Connection" in the
printed manual: Getting Started.
<Default State>
Wireless LAN
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP settings
Obtain an IP address automatically
0