Canon PIXMA MP495 Series Network Setup Manual - Page 11
Browse online or download pdf Network Setup Manual for All in One Printer Canon PIXMA MP495 Series. Canon PIXMA MP495 Series 24 pages. Cartridge reset
Also for Canon PIXMA MP495 Series: Installation Manual (22 pages), Network Manual (20 pages), Manual (8 pages), Network Setup Manual (9 pages), Manual (4 pages)
Print Page
- 1. Table of Contents
- 2. The Target Access Point Is Not Displayed (Detected) on the Detected Access Points
- 3. Set Printer Ip Address Screen Is Displayed
- 4. The Machine Is Not Displayed (Detected) on the Detected Printers List Screen
- 5. Problems During Network Setup
- 6. Configuring Wireless Lan Settings Manually
- 7. Other Troubleshooting Tips
- 8. Restoring the Machine's Default Lan Settings to Perform Setup Again
Restoring the Machine's Default LAN Settings to Perform Setup Again
Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Press the Maintenance button 14 times.
•
The screen shown to the right appears.
2
Press the Black button or the Color button.
The LAN setting of the machine is now restored to the default state.
•
Perform setup again by following the procedures from "6 Set Up a Wireless Connection" in the
printed manual: Getting Started.
<Default State>
Wireless LAN
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP settings
Obtain an IP address automatically
0