DOORWORKS GDC6 Instruções de instalação e manual do proprietário - Página 5

Procurar online ou descarregar pdf Instruções de instalação e manual do proprietário para Abertura de porta de garagem DOORWORKS GDC6. DOORWORKS GDC6 20 páginas. Overhead door operator

Imprimir página

Door Test

Before beginning installation of the operator please complete the following test to insure that your door is balanced and

in good working condition. A poorly balanced door could cause severe personal injury and damage to the opener.

Always have a qualified garage door service person make any needed adjustments and/or repairs to your door before

proceeding with installation.

Sectional Door

1. Raise and lower the door and check closely for areas of

sticking and binding. Check for loose hinges, wobbly

rollers, frayed cables and damaged or broken springs.

Contact a qualified garage door service person to make

the necessary adjustments.

2. Lift the door approximately halfway. When released,

the door should stay in that position. If door pulls open

or moves downward, the spring mechanism is not

adjusted properly. Contact a qualified garage door

service person to make the necessary adjustments.

3. When properly installed and adjusted the door will

remain clear of the opening, when allowed to rest at its

natural full open position. If door drifts up or down the

door is not adjusted properly. Contact a qualified

garage door service person to make the necessary

adjustments.

Do not install the opener until these adjustments and repairs have been made.

Carefully follow the instructions for the assembly and installation of the garage door opener

contained in this manual

Tools

Required

for

Assembly

and Installation

Open End

Wrench

5/16" and

1/2" and 7/16"

Socket and

Wrench

Level

Pliers

1/4"

Tape

Measure

Drill

Screw Driver

Pencil

3/16" and

5/16" Drill

Claw Hammer

Hand Saw

Step Ladder