DOORWORKS GDC6 Instruções de instalação e manual do proprietário - Página 7

Procurar online ou descarregar pdf Instruções de instalação e manual do proprietário para Abertura de porta de garagem DOORWORKS GDC6. DOORWORKS GDC6 20 páginas. Overhead door operator

Imprimir página

Assembly 01

STEP 1.

Remove packing materials.

STEP 2.

Place the rail support on the power head. Align rail and

power head and slide rail over drive shaft& retaining lugs.

Fasten with 4 nuts.

1/4"-20Hex Flange

Nuts (4)

Rail-to-Head Bracket

Rail

STEP 3.

Adjust the tension of chain/belt at end rail. Turn clockwise

to tighten and counterclockwise to loosen.

NOTE: Improper tension will result in abnormal opener

operation.

Tighten

Loosen

STEP 4.

Header Wall

Install head bracket. The height is seen in fig.5 Head

bracket position is higher than header wall and mark the

horizontal line.

Track

******"

5cm Clearance

Door

High Point of

Door Travel

Support

Block