DOORWORKS GDC6 Kurulum Talimatları ve Kullanım Kılavuzu - Sayfa 7

Garaj Kapısı Açıcı DOORWORKS GDC6 için çevrimiçi göz atın veya pdf Kurulum Talimatları ve Kullanım Kılavuzu indirin. DOORWORKS GDC6 20 sayfaları. Overhead door operator

Sayfayı Yazdır

Assembly 01

STEP 1.

Remove packing materials.

STEP 2.

Place the rail support on the power head. Align rail and

power head and slide rail over drive shaft& retaining lugs.

Fasten with 4 nuts.

1/4"-20Hex Flange

Nuts (4)

Rail-to-Head Bracket

Rail

STEP 3.

Adjust the tension of chain/belt at end rail. Turn clockwise

to tighten and counterclockwise to loosen.

NOTE: Improper tension will result in abnormal opener

operation.

Tighten

Loosen

STEP 4.

Header Wall

Install head bracket. The height is seen in fig.5 Head

bracket position is higher than header wall and mark the

horizontal line.

Track

******"

5cm Clearance

Door

High Point of

Door Travel

Support

Block