AMES 1000SS Series Manual - Página 3
Procurar online ou descarregar pdf Manual para Unidade de controlo AMES 1000SS Series. AMES 1000SS Series 4 páginas. Detector check valve assemblies sizes: 4" – 10" 100-250mm
Imprimir página
Repair Parts
Item #
Part Description
1.
Cam-Check Assembly
2.
Cam-Check O-ring (removable)
3.
Groove Coupler
4.
Groove Coupler Gasket
5.
Cover Plate
Figure 2
4
2
4" and 6" Cam-Check Disassembly
Please use caution when disassembling cam-check.
Figure 4
Using a thin rod or screwdriver, lift the cambar up so that the
clapper is free to swing upwards away from the seat.
Figure 5
Using your free hand, swing the clapper open until the roller is
almost to the free end of the cambar. Align the maintenance
lockout holes in the cambar and the hinge arms.
Secure the check assembly in the maintenance position by
inserting a rod or thin screwdriver through the lock-out holes.
Repair Parts
Item # Part Description
1.
1st Cam-Check O-ring (removable)
2.
Clapper Assembly (removable)
3.
Pivot Arm Pin (removable) 2 c-clips
Ames Part No.
Qty.
4"
1
7015580
7016695
1
7013229
7013301
1
7013194
7013287
1
7013248
7013308
1
7013241
7013289
3
5
1
Ames Part No.
Qty.
4"
6"
1
7013229 7013301
1
7016899 7016900
1
7013853 7013841
6"
Figure 6
Remove 1 c-clip from the center pivot pin. Withdraw the
centerpivot pin from the clapper and the hinge arms. Remove
the clapper assembly from the check assembly module.
Note: You may replace this item as an assembly.
Figure 4
3
Figure 3
#1 Cam-Check
Figure 5
Figure 6
Figure 7
1
Cam bar
2
3