Doran Scales DS100 Manual do operador - Página 12

Procurar online ou descarregar pdf Manual do operador para Instrumentos de medição Doran Scales DS100. Doran Scales DS100 15 páginas. Scale indicator

Imprimir página

1. Error Messages

Section 6. Troubleshooting

General Problem Resolution

Weight reading will not repeat or

scale does not return to zero when

weight is removed.

Scale overloads early

Scale will not come to zero when the

ZERO button is pressed.

Weight readings don't seem to be

correct.

Scale drifts off zero.

Scale shuts itself off or will not turn

on.

Problem

What to Do or Check

Make sure that the scale platter is not

rubbing or touching the scale cover. Verify

that there is nothing caught in the platform,

under or around the load cell.

Verify scale calibration is correct. If

problem persists, recalibrate the scale.

Make sure that the scale is becoming

stable (Motion annunciator is off). After

pressing the ZERO button, the scale

should zero as soon as it becomes stable.

If problem persists, there may be a

problem with the touch panel or

motherboard.

Verify the scale calibration with an

accurate test weight. If the readings are

not correct, recalibrate.

Check for air currents and/or vibration

around the scale. If that is the cause, it

may be necessary to set the

parameters to wider settings to

compensate (see the parameter section.)

Verify that no mechanical restrictions exist,

i.e. platter rubbing, something caught

under or around the load cell.

Press the ZERO button to turn on the

indicator.

The transformer may be bad or the power

connector at the rear of the scale may

have an intermittent connection. Check

the power connector at the rear of the

scale.

A T and nnA